Starrett HEIGHT TRANSFER GAGE, 24″ 252Z-24
The Starrett 252 Height Transfer Gage is ideal for use with test indicators or electronic amplifiers to accurately transfer height settings from gage blocks, height gages and other standards. 0-24″Â (600mm) Range.
FEATURES
- Extreme rigidity provides the vibration proof stability necessary to permit precise, repeat readings with indicators of the highest amplification
- Extremely rigid, rectangular box-type hollow column mounted integrally on a heavy base
- Adjusting mechanism is located in the base so the column and indicator are isolated and not affected by external factors, i.e. heat or hand pressure
- Hand-fitting base design for sure-grip handling and easy movement
- Bottom of the base has three ground and lapped pads for stability and smooth movement on the surface plate
- Adjustable slide, incorporating a snug for holding test indicators or electronic gage heads, has rapid vertical manual adjustment
- Thumb screw allows slide to be locked
- Knob on base allows fine vertical adjustment of the slide unit relative to the fixed column
- A snug on the slide provides two holes (.375″ [9.5mm] and .156″ [4mm]) for holding gage rods or scribers
- The rod has a major diameter of .375″ (9.5mm) and stepped diameters of 1/4″ (3.2mm) and 7/32″ (5.5mm) at one end and 5/16″ (8mm) at the opposite end.
- Starrett 25, 81, 655 and 656 Series Dial Indicators also can be used on the height gage by means of a PT06784-A Gage Rod
